Monday, August 14, 2006

Engine in - images

Yet again Blogger fails to upload images in the previous post, and wont let me add them, so here they are:

Adaptor plate fouled on the water pipe pipe

Gearbox had to have four sections cut away to allow it to mate up with the engine tightly.

To allow clearance for the bolts that hold the plate to the engine

One of the bolts that holds the gearbox to the plate has to have the side of the head removed to give it clearance from the engine casing .

And finally engine and gear box mated together in their new orientation. Note how low the front of the engine sits compared to the gearbox.


Post a Comment

<< Home